Vent Axia Solo Pro 409160 Centrifugal Extractor Fan Timer

Specification:

Extraction: 80m3/hr - 22L/s
Power: 19w
Noise: 30dB(A)
Dimensions: W154 - H154 - D119
Spigot Diameter: 100mm
Spigot Depth: 25mm
IPX4 - Safe for Zone 1 Installation on RCD protected circuit

Overview

The Vent Axia Solo Pro 490160 Centrifugal Fan with Timer was developed specifically for installations requiring extra-long duct runs - for example, offices, toilets, or apartments - when ventilation to the outside wall is not possible through an external wall.

This extractor fan somewhat incredibly delivers 15L/s as required by building regulations even on straight duct runs of 5m. Whilst any bend in the ducting will reduce this overall length, this still leaves huge scope for ventilation in even the most restricted installations. On shorter, more normal duct runs for less than 5m the Solo Pro offers 80m3/hr or 22L/s.

The Solo Pro 409160 model has an over-run timer, to keep the fan running after you have turned it off. Adjustable from 5 to 30 minutes, this will make sure all steam is extracted before turning off. Operating at 30dB(A) it is very quiet and will provide years of unobtrusive extraction. It may be surface mounted, on either the wall, ceiling, or window. ..(with window kit 11461685).

Key Features

• Centrifugal impeller for long duct runs and internal rooms
• Adjustable over-run timer
• Silent nighttime operation - daytime boost

Specification

• Extraction: 80m3/hr - 22L/s
• Noise: 30dB(A)
• Dimensions: (W)154 mm x (H)154 mm x (D)119 mm

To Install This Fan...

You will need the following, all available from the accessories list below:

• 1 x Length of 4 inch flexible aluminium ducting. (sold by the metre)
• 2 x Duct clamps (optional, but recommended)
• 1 x Fixed external grille

2 Years