Vent Axia Solo Pro 409159 Centrifugal Extractor Fan Pullcord

Specification:
Extraction: 80m3/hr - 22L/s
Power: 19w
Noise: 30dB(A)
Dimensions: W154 - H154 - D119
Spigot Diameter: 100mm
Spigot Depth: 25mm
IPX4 - Safe for Zone 1 Installation on RCD protected circuit

The Vent Axia Solo Pro was developed specifically for installations requiring extra long duct runs - for example, offices, toilets or apartments - when ventilation to the outside wall is not possible through an external wall.

The Solo Pro - somewhat incredibly - delivers 15L/s as required by building regulations even on straight duct runs of 5m. Whilst any bend in the ducting will reduce this overall length, this still leaves huge scope for ventilation in even the most restricted installations. On shorter more normal duct runs fo less than 5m the Solo Pro offers 80m3/hr or 22L/s.

The Solo Pro 409159 model has a built in pullcord if manual over ride or local switching is required. Operating at 30dB(A) it is very quiet and will provide years of unobtrusive extraction. It may be surface mounted, on either the wall, ceiling or window. ..(with window kit 11461685).

To Install This Fan...
You will need the following, all available from the accessories list below:
1 x Length of 4 inch flexible aluminium ducting. (sold by the metre)
2 x Duct clamps (optional, but recommended)
1 x Fixed external grille

2 Years