Vent Axia Quadra TM 439253 240v Centrifugal Fan + Timer & PIR Occupancy Sensor

	Extremely powerful - 216m3/hr
	3 'Trickle' and 3 'Boost' speeds
	Rear entry or vertical duct option
	Washable Filters, Integral back-draught shutters
	Low Energy, Long life motor - 40,000hr
	Surface, flush, wall, ceiling, window mounted
	IP65 rated for Bathroom Zone 1 Installation
	Integral PIR occupancy sensor & over run timer
	5 Year warranty

 

Quadra Specification Extraction m3/hr   Extraction L/s      Noise : Watts

High Setting: 54 / 108 / 216 15 / 30 / 60  50dB(A) (max) 38w (max)

Low Setting: 22 / 32/ 43 6 / 9/ 12  20dB(A) (max) 3.8w (max)

EFW Review of the Quadra TM 

If you're looking for a top quality, powerful, good looking, quiet, low energy, versatile, centrifugal fan, with a long life motor then look no further! - The Quadra is quite simply the best wall mounted centrifugal fan on the market. 

The Quadra features 'Boost' and 'Trickle' speeds: Boost, for when the bathroom is in use and Trickle to keep the room ventilated at all other times. We think the 'Trickle' function is a great feature as all bathrooms have residual water and damp after the shower or bath has been used, but it comes into its own in bathrooms which have no natural ventilation - often the case with ensuites - as it keeps the room permanently ventilated. Both 'Boost' and 'Trickle' have three speed options, set upon install, to suit the room being ventilated.
 
The Quadra TM will switch from 'Trickle' to 'Boost' by use of integral PIR motion / occupancy sensor, over-ride pull switch, remote switch or light switch. The over-run timer is adjustable from 1-30 mins. After the pre-set period, the fan will return to Trickle speed.

The Quadra may be either surface or flush mounted using the optional flush mounting kit (439256). It can be window mounted using the optional window kit (442947). There is also an optional filter available (439927). See You May Also Need below. The Quadra may be wall, window or ceiling mounted and has an innovative dual ducting system, allowing for rear entry or vertical entry ducting. It also features integral backdraught shutters and can happily duct up to 6 metres.

In summary, you will not find a better centrifugal extractor fan. It marries superb build quality with outstanding functionality and packs in a load of great features. Easily scored 5 stars in our review.

To Install This Fan...
You will need the following, all available from the accessories list below:
1 x Length of flexible aluminium ducting. (sold by the metre)
2 x Duct clamps (optional, but recommended)
1 x Fixed external grille - available in white, grey or brown

Dimensions
- Height: 260mm
- Depth: 112mm
- Width: 230mm

2 Years