Vent Axia 444368 12v SELV Lo Carbon Tempra P Heat Recovery Unit + Pullcord

VENT AXIA 444368
Vent Axia12v Tempra P with Pullcord to Boost
Single Room Heat Recovery Unit  for Installation in Zone 1 & 2

Performance:
Trickle Low 6 L/s / 21.6m3/hr
Trickle High 9 L/s / 32.4m3/hr
Boost 15L/s / 54m3/hr

Requires the following additonal part available at Extractor Fan World:
445529 Wall Sleeve

Range Overview:
Revolutionary patented technology; The Vent-Axia Lo-Carbon Tempra through the wall heat recovery units are suitable for fitting through a 102mm (4) circular hole and are designed for use in bathrooms, toilets and utility areas. Under the new Building Regulations Document F continuous running products, such as the Lo-Carbon Tempra only need to move the amount of air as laid down in table 5.1a of Document F. The Vent-Axia Lo-Carbon Tempra is available with pullcord control, timer control or humidistat, timer and pullcord. All models are also available in SELV (Safety Extra Low Voltage).

Vent Axia 444368 Features
- Recovers up to 74% of the heat from extracted air and puts it back into the fresh incoming air.
- Fits standard 100mm diameter hole.
- Low energy consumption, low noise.
- Complies with Building Regulations Part F, System 1 and may also be used in conjunction with System 3, continuous mechanical extract ventilation.
- The Tempra exceeds Building Regulations Part L 2010: Conservation of Fuel and Power.
- Summer Setting assists cooling by closing off the intake from outside, reducing warm air intake.

5 Years