Airflow Icon ECO30S Hi-Power Low Voltage All Zones Bathroom Fan - 72683801

Overview

The Airlfow Icon ECO30s fan is a very powerful, great looking, low voltage (SELV) extractor fan which may be installed in any zone in the bathroom. In a world full of squares, the stylish, circular Icon stands apart and features the eye-catching 'iris' back draught shutter, which opens automatically when the fan is turned on.

But the ECO30s is not just a pretty face. Boasting an extraction rate of 123m3/hr, thanks to its 'mixed flow' impeller, the ECO30s is a seriously powerful fan - about 35% more powerful than the most powerful 4 inch axial fan - and it does this using only 13w!

A range of optional control modules are available for the icon, including over-run timer, humidistat, pullcord and PIR occupancy sensor. These are purchased separately and installed with the fan by your electrician - please see the 'you may also need' section below. Of course, you may just wire the Icon into your lighting circuit or remote switch.

The ECO30s may be wall or ceiling mounted and is ductable up to 9m meaning you can install it right above the shower or bath and duct through the loft or ceiling void, thus extracting steam at source. Please note that the ECO30S fits to 4 inch ducting and accessories, but requires a 6 inch cut out if being recessed.

Key Features

• Air Extraction : 123m3/hr (max) Air Extraction L/s : 34 L/s (max)
• Noise : 34.5dB(A) (max)SFP compliant (0.33 w/l/s) and meets 2010 Building Regulations
• 100mm (4) axial fan with 12v DC transformer
• Flow rate up to 37 l/s
• Power consumption only 12.2 watts
• Quiet operation, Silent shutter
• Universal Voltage 110/240v 50/60Hz
• Ductable up to 9m
• Stylish, easy to fit, slim profile
• Wall/ceiling, surface/recessed mounting
• Interchangeable control modules match fan to installation
• Choice of Silver, Sandstone & Anthracite covers
• IPX4 Protection
• 3 year warranty

3 Years