|
|
- Home |
- About Us |
- Contact Us |
- Help
COVID-19 Delivery and Service
Extractor Fan World Help
The Best Extractor Fans
Vent Axia Solo Centrifugal Extractor Fan
|
In this video, we're going to take a look at the Lo-Carbon Solo Plus Centrifugal Fan from Vent Axia, which is specifically designed for use in internal rooms or installations with long duct runs. Ideal for wall or ceiling mounting, the Lo-Carbon Solo Plus can run constantly on a silent 'trickle' setting at 25m3/h, consuming just 5.3w. However, when triggered into its 'boost' function at 90m3/h, the fan will run at this higher boost level until its trigger mechanism returns it to its trickle function state. Alternatively, the Lo-Carbon Solo Plus can also run like a normal fan, either off or on at the boost level when required. |
- Each of the functions available come in a mains voltage 240v version and a SELV 12v Low Voltage version for installation in Zone 1 of your bathroom.
- The 427481 Lo-Carbon Solo Plus P and the 427485 Lo-Carbon Solo Plus SELV P are triggered by pullcord. Simple functionality, pulling on the pullcord triggers the fan to come on, or switch to boost depending on how you have it set up, and then pull again to switch off.
- The 427482 Lo-Carbon Solo Plus T and the 427486 Lo-Carbon Solo Plus SELV T are fitted with an over-run timer. In most installations this fan will be attached to the lighting circuit, so when the lights are switched on, the fan will trigger. Then, when the lights are switched off, it will continue to run for however long the timer is set for, adjustable between 2 and 20 minutes at the point of installation.
- The 427483 Lo-Carbon Solo Plus HT and the 427487 Lo-Carbon Solo Plus SELV HT have both a built in humidistat and timer. This proves to be a very versatile set up in that it can still be attached to the lighting circuit and run as the timer version before, but it will also trigger when it senses steam or moisture in the air, even with the lights turned off. This is particularly useful in a bright, naturally lit bathroom, with a large window perhaps, that is likely to be used at times without turning the lights on. The sensitivity of the humidistat can be adjusted from between 60% and 90% relative humidity to suit the conditions of your bathroom. There is also a pullcord for manual over-ride should this function be required.
- The 427484 Lo-Carbon Solo Plus TM and the 427488 Lo-Carbon Solo Plus SELV TM feature a PIR and timer. The timer works as mentioned before, but it can be activated by the lighting circuit, a pullcord or via a Passive Infra-Red sensor, which senses the presence of a person in the room and triggers the timer function to run - particularly useful with children or tenants who can't be trusted to turn the fan on themselves.
- Other useful features available with the Solo Plus include a removable and washable filter and a flush mounting kit, allowing the fan to be mounted flush to the wall where space allows.
Extractor Fan World : "One small step for Fans, One giant leap for Fankind"
We have over 21 years' experience in supplying electrical materials to both trade and end user customers.
Visit New Worlds! - Switches & Sockets - Lightbulbs - Consumer Units - Halogen