Low Energy Centrifugal Bathroom Extractor Fan with Pullcord
Duct Mode Speed - Boost Air Extraction m3/hr : 76 m3/hr Air Extraction L/s : 21 L/s Noise : 35dB(A) Wattage : 8.4w | Wall Mode Speed - Boost Air Extraction m3/hr : 65 m3/hr Air Extraction L/s : 18 L/s Noise : 33dB(A) Wattage : 6w |
Speed - High Trickle Air Extraction m3/hr : 61m3/hr Air Extraction L/s : 17 L/s Noise : 33dB(A) Wattage : 5.3w | Speed - High Trickle Air Extraction m3/hr : 43m3/hr Air Extraction L/s : 12 L/s Noise : 27dB(A) Wattage : 2.9w |
Speed - Low Trickle Air Extraction m3/hr : 39m3/hr Air Extraction L/s : 11 L/s Noise : 26dB(A) Wattage : 3.2w | Speed - Low Trickle Air Extraction m3/hr : 30m3/hr Air Extraction L/s : 8 L/s Noise : 23dB(A) Wattage : 2.3w |
Features Trickle Function Long Duct Runs Low Noise, Low Energy Washable Filters |
OverviewThe Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F.
Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F.
The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR.
All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axias flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.
Up to 70% energy saving
Filterless as standard - innovative impeller design means no need for a filter
5 Year Lo-Carbon motor guarantee
Meets current Building Regulations Approved Documents F & L
IPX4 rated - IPX7 rated (SELV)
Flush or surface mountable with adjustable rear or side exit spigot
SELV models suitable for installation over or within reach of a shower or bath
Extremely low sound levels
Suitable for wall, ceiling and panel mounting
SELV Models - Supplied with a remote transformer