{"title":"Home page","description":null,"products":[{"product_id":"tornado-st100t-silent-100mm-bathroom-fan-with-timer","title":"Tornado ST100T Silent 100mm Bathroom Fan with Timer","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe Silent Tornado ST100T is an exceptional extractor fan. Using an IP45 rated motor, it is \"resistant to jets of water from all angles\" and can therefore be installed anywhere in the bathroom. Very powerful and quiet, it is also very energy efficient, using only 7.5w on full power.\u003c\/p\u003e\u003cp\u003eThe ST100T comes with an integral adjustable over-run timer that may be set from 2 to 30 minutes, ensuring your bathroom is completely free of steam and moisture. The ST100T may be ducted up to 5m in a straight run or 4m with 2 right-angled bends and can, therefore, be installed on the ceiling and ducted through the loft without compromising performance.\u003c\/p\u003e\u003cp\u003eIn summary, the best bathroom fan on the market by quite a distance, and the manufacturers are so confident in its performance and reliability that they offer a full five-year guarantee. Furthermore, it comes to market considerably cheaper than all comparable models which it comfortably out-performs and represents fantastic value. We highly recommend this fan.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMost powerful 4 inch intermittent axial fan available - 97m3\/hr\u003c\/li\u003e\n\u003cli\u003eQuietest bathroom fan on the market - 25db(A)\u003c\/li\u003e\n\u003cli\u003eIPX5 waterproof rated - Install in any bathroom zone\u003c\/li\u003e\n\u003cli\u003e7.5w - Less energy than any equivalent axial fan\u003c\/li\u003e\n\u003cli\u003eWall or ceiling mounted\u003c\/li\u003e\n\u003cli\u003eIntegral back draught shutters\u003c\/li\u003e\n\u003cli\u003eIntegral over run timer to clear all steam\u003c\/li\u003e\n\u003cli\u003eFive Year Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWidth: 158mm\u003c\/li\u003e\n\u003cli\u003eHeight: 158mm\u003c\/li\u003e\n\u003cli\u003eSpigot Depth: 79mm\u003c\/li\u003e\n\u003cli\u003eSpigot Diameter: 98mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/what-parts-do-i-need-to-install-a-wall-mounted-fan\"\u003eWhat else do I need to install my wall mounted fan?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/a-guide-to-bathroom-zones\"\u003eA Guide to Bathroom Zones\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tornado","offers":[{"title":"Default Title","offer_id":58032054436104,"sku":"TOR ST100T","price":56.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/tornado-st100t-silent-100mm-bathroom-fan-with-timer-3435-p.jpg?v=1784041525"},{"product_id":"tornado-tt100prot-turbo-tube-4-100mm-inline-fan-with-timer","title":"Tornado TT100PROT Turbo Tube 4\"\/100mm Inline Fan with Timer","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eAt 300m3\/h, the Turbo Tube TT100PROT is the most powerful 4 inch fan available, perfect for all domestic bathrooms. The extraction rate on on the Turbo Tube is almost three times that of the best surface mounted axial fan. It is also quiet and being installed in the loft above the bathroom, is totally hidden from view, the only visible part in the bathroom is a discrete flush mounted 4 inch circular grille.\u003c\/p\u003e\u003cp\u003eDucting an extractor fan to the outside world can be problematic. Indeed all wall mounted axial fans require the chopping of a four inch hole in your bathroom wall! Not so for the Turbo Tube, which is usually ducted to a convenient place in your soffit. Using 'mixed flow' technology, which combines the features of both axial and centrifugal impellers, it generates greater pressure and can thus cope with long duct runs of up to 10 metres without significant loss of power. This gives total flexibility in installation allowing you to site the fan in the optimum place for extracting, ducting, mounting and electrical connections.\u003c\/p\u003e\u003cp\u003eIt is also suitable for installations in which dust and grime can cause problems for other fans - such as commercial kitchens or workshops. The Turbo Tube, uniquely features a removable chassis - permitting easy maintenance and cleaning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePowerful extraction rate - 300m3\/hr - 86 L\/s (Max)\u003c\/li\u003e\n\u003cli\u003eVery Quiet - 24db(A) @ 3m\u003c\/li\u003e\n\u003cli\u003e24w - Less energy than any equivalent inline fan\u003c\/li\u003e\n\u003cli\u003e3 Speed selectable on installation\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install. No electrics in the bathroom\u003c\/li\u003e\n\u003cli\u003eInstall in the ceiling void. No decorating in the bathroom\u003c\/li\u003e\n\u003cli\u003eDuct from the source directly above the bath or shower\u003c\/li\u003e\n\u003cli\u003eDuct up to 10 metres without major loss of power\u003c\/li\u003e\n\u003cli\u003eIntegral over run timer\u003c\/li\u003e\n\u003cli\u003eFive Year Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWidth: 195mm\u003c\/li\u003e\n\u003cli\u003eHeight: 226mm\u003c\/li\u003e\n\u003cli\u003eLength: 302mm\u003c\/li\u003e\n\u003cli\u003eSpigot Diameter: 97mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstalling the Turbo Tube Inline Duct Fan\u003c\/h3\u003e\u003cp\u003eYou will need the following, all available from the accessories list below:\u003c\/p\u003e\u003cp\u003e2 x Length of flexible aluminium ducting (sold by the metre)\u003cbr\u003e1 x Internal back draught shutter\u003cbr\u003e4 x Duct clamps\u003cbr\u003e1 x Circular internal grille\u003cbr\u003e1 x Fixed external grille - available in white, grey or brown\u003cbr\u003e1 x Condensation trap (If the fan and duct are fitted vertically)\u003c\/p\u003e\u003cp\u003eAn inline fan is installed in the loft or ceiling void above the bathroom (or kitchen etc). Ducting is attached to each end of the fan with one length going to an internal grille in the ceiling of the bathroom and the other going to a grille on the external wall, soffit, or roof.\u003c\/p\u003e\u003cp\u003eDuct clamps are used to connect the ducting to each end of the fan and to the spigot of each of the grilles. The back draught shutter may be installed anywhere in the \u003cstrong\u003eexhaust \u003c\/strong\u003educting - that is to say, the ducting which runs from the fan to the outside grille, but is usually situated as near to the outside grille as possible. It's worth pointing out, that the backdraught shutter must be fitted the right way round!\u003cbr\u003e\u003cbr\u003eUnlike a wall mounted fan that is installed in the bathroom; an inline fan sits out of sight, within the run of ducting in the loft or ceiling. This offers the following benefits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo coring through brickwork required, just a simple 4 inch hole in the ceiling that is covered by a discrete grille. \u003c\/li\u003e\n\u003cli\u003eIt's easy to install - in the attic, ceiling void or loft space - there are no electrics for the fan in your bathroom at all.\u003c\/li\u003e\n\u003cli\u003eThis means there is no making good to be done when the job is finished. No plastering, painting or re-tiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe fan can be mounted anywhere along the duct run - wherever is most suitable for wiring connections and secure mounting. Ducting is then connected onto both ends of the fan, one for the input side and the other for the exhaust side, totalling your full duct run length. \u003cbr\u003e\u003cbr\u003eTo prevent air from coming back into the room via the duct run, an in-line backdraft shutter is fitted somewhere in the duct run. Either on the exhaust end of the fan, within the run of duct held in place by a duct clamp, or at the exterior grille for example.\u003cbr\u003e\u003cbr\u003eExit to outside requires a grille We recommend the Energy Saver No Resist Backdraft Grille - which prevents backdraughts without adding resistance to the ducting system. Internally, a grille is fitted on the ceiling. To ensure the ducting system is entirely air tight - which maximises the efficiency of the fan - we recommend the use of duct clamps when attaching the ducting to the spigots of the fan and grilles.\u003cbr\u003e\u003cbr\u003eIn summary, the Turbo Tube is not only the best inline duct fan, but in our expert opinion, it is the \u003cstrong\u003ebest all round fan available\u003c\/strong\u003e. If you have loft space above the bathroom and if your installation allows, the Turbo Tube inline fan is the best extraction solution. Also available in 'Timer' version.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:14px;\"\u003eUseful Links\u003cbr\u003e\u003ca href=\"\/blogs\/what-parts-do-i-need-to-install-an-inline-fan-in-my-bathroom\"\u003e\u003cspan style=\"color:#0000ff;\"\u003eWhat items do I need to install an inline fan in my bathroom?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/blogs\/a-guide-to-bathroom-zones\"\u003e\u003cspan style=\"color:#0000ff;\"\u003eA Guide to Bathroom Zones\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Tornado","offers":[{"title":"Default Title","offer_id":58032169189640,"sku":"NVT TT100PROT","price":68.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/tornado-tt100prot-turbo-tube-4-100mm-inline-fan-with-timer-3785-p.jpg?v=1784041916"},{"product_id":"envirovent-sil150s-silent-six-inch-kitchen-fan","title":"Envirovent SIL150S Silent Six Inch Kitchen Fan","description":"\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"1\" style=\"width: 400px\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"0\" style=\"width: 200px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"Six Inch Extractor Fan\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default\"\u003e\u003c\/td\u003e\n\u003ctd\u003eIP45 Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"SIL150 Envirovent\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default;\"\u003e\u003c\/td\u003e\n\u003ctd\u003eSilent elastic mounting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"Bathroom fan with Timer\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default;\"\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"Bathroom fan with Timer\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default;\"\u003e\u003c\/td\u003e\n\u003ctd\u003eLong life ball bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"0\" style=\"width: 200px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"Six Inch Extractor Fan\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default\"\u003e\u003c\/td\u003e\n\u003ctd\u003ePowerful : 280m3\/hr (!)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"SIL150 Envirovent\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default;\"\u003e\u003c\/td\u003e\n\u003ctd\u003eVery Quiet - 32db(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"Bathroom fan with Timer\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default;\"\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegral back draught shutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25px; height: 21px\"\u003e\u003cimg alt=\"Bathroom fan with Timer\" src=\"https:\/\/files.ekmcdn.com\/dboy1234\/resources\/design\/s-extractor-fan-reviews.jpg\" style=\"width: 20px; height: 20px; cursor: default;\"\u003e\u003c\/td\u003e\n\u003ctd\u003eReplaces existing kitchen fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cbr\u003eThe Envirovent SIL150S is the \u003cem\u003e\u003cstrong\u003eStrong and Silent\u003c\/strong\u003e\u003c\/em\u003e type of the fan world. Sucking the stale air out of your kitchen, utility or extra large bathroom at a rate of 280m3\/hr, the SIL150S delivers superb performance without making a big noise about it.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e- Width: 214mm\u003cbr\u003e- Height: 214mm\u003cbr\u003e- Spigot Depth : 80mm\u003cbr\u003e- Spigot Diameter : 147mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTo Install This Fan...\u003c\/strong\u003e\u003cbr\u003eYou will need the following, all available from the accessories list below:\u003cbr\u003e1 x Length of 6 inch\/150mm flexible aluminium ducting. (sold by the metre)\u003cbr\u003e2 x Duct clamps (optional, but recommended)\u003cbr\u003e1 x Fixed external grille\u003cbr\u003e ","brand":"Envirovent","offers":[{"title":"Default Title","offer_id":58032323166472,"sku":"ENV SIL150S","price":80.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/envirovent-sil150s-silent-six-inch-kitchen-fan-4332-p.jpg?v=1784042342"},{"product_id":"envirovent-silent-dual-100-ultra-quiet-bathroom-fan-with-pir-and-humidistat","title":"Envirovent Silent Dual 100 Ultra Quiet Bathroom Fan With PIR and Humidistat","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe SILENT DUAL is an intelligent extractor fan for bathrooms and WCs. It automatically adjusts its performance according to the environment and ventilation requirements via two sensors: a presence detector and a humidity sensor.\u003c\/p\u003e\u003cp\u003eIncorporating an intelligent algorithm to automatically adjust its settings according to the environmental conditions, it does not require the need for user interaction. The motor is commissioned to achieve the required flow rate, minimising the electricity consumption and noise levels to meet the exact ventilation requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDUAL FUNCTION -provides optimum versatility to be programmed as either an intermittent or continuous running fan. In intermittent mode, the fan starts automatically when it detects a slow increase in humidity. As humidity rises and falls, the motor speed tracks the humidity in direct correlation until the humidity level has fallen below the set threshold, ensuring quiet and efficient operation. In intermittent mode, the fan also automatically starts (75% of the maximum speed) when movement is detected and will continue to operate for the set period selected by the adjustable run-on timer. There are two settings available for the over-run timer: 2 minutes (for bathrooms less than 4m2) and 15 minutes\u003c\/li\u003e\n\u003cli\u003eDUAL SENSING - The fan operates automatically when it detects movement (via the PIR) or rises in humidity levels and activates a pre-set mode to achieve the lowest energy consumption and the lowest noise level.\u003c\/li\u003e\n\u003cli\u003eDUAL INLETS - The fan has dual inlets for enhanced aerodynamic performance. Air is directed via the front and side panels, achieving similar performance to a traditional front grille but in a stylish and slim-line design to deliver greater pressure at low flow rates.\u003c\/li\u003e\n\u003cli\u003eDUAL CONNECTION - 2-wire installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions - (H) 167mm x (W) 167mm x (D) 157mm\u003c\/li\u003e\n\u003cli\u003eDecibel Rating - 20 \/ 22 \/ 26.5 Db @ 3 metres\u003c\/li\u003e\n\u003cli\u003eAirflow - 25 \/ 65 \/ 95 m³\/h\u003c\/li\u003e\n\u003cli\u003eIP Rating - IP45\u003c\/li\u003e\n\u003cli\u003eWarranty - 5 years\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Envirovent","offers":[{"title":"Default Title","offer_id":58035216908552,"sku":"ENV SILDUAL-100","price":108.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/envirovent-silent-dual-100-ultra-quiet-bathroom-fan-with-pir-and-humidistat-5122-p.jpg?v=1784044165"},{"product_id":"tornado-st100dmevht-silent-dmev-continuous-running-extractor-fan-humidistat-timer","title":"Tornado ST100DMEVHT Silent dMEV Continuous Running Extractor Fan Humidistat \u0026 Timer","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe Silent Tornado dMEV range adds two impressive constant flow decentralised extract ventilation fans to the already hugely popular Silent Tornado range of extractor fans.\u003c\/p\u003e\u003cp\u003eThe Silent dMEV range is the most powerful wall or ceiling-mounted axial extractor from Tornado to date. It features a high-pressure axial impeller, which offers near silent operation, as low as 13dB(A) and an impressive extraction rate of 126m3\/h (35l\/s). The Tornado dMEV has been specifically designed to protect your home against damp and mould issues.\u003c\/p\u003e\u003cp\u003eThe Tornado dMEV features Constant Volume Technology (CVT). The airflow is adjustable with 1l\/s increments to allow for easy installation and commissioning, with the integrated UKAS calibrated airflow sensor, you can be confident that it will work as intended.\u003c\/p\u003e\u003cp\u003eThis particular model (ST100DMEVHT) features an integrated humidistat and timer. The humidistat will ensure that any moisture in the air is cleared before the fan switches off.\u003c\/p\u003e\u003cp\u003eDesigned to be a perfect fit within kitchens, utility rooms, and bathrooms, the unit can be installed with constant and switched live connections allowing the fan to be triggered via both humidity and manually or can also be installed with just a constant live for automatic triggering by humidity only.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e126m3\/h 35 litres per second (Boost) \/ 18m3\/h, 5 litres per second (Trickle)\u003c\/li\u003e\n\u003cli\u003eStunning gloss white cover\u003c\/li\u003e\n\u003cli\u003eTrickle High efficiency with low SFPs\u003c\/li\u003e\n\u003cli\u003eFully adjustable normal and boost airflow settings\u003c\/li\u003e\n\u003cli\u003eIntegral humidistat\u003c\/li\u003e\n\u003cli\u003eConstant volume technology (CVT)\u003c\/li\u003e\n\u003cli\u003eIPX5 rated for zone 1 installations\u003c\/li\u003e\n\u003cli\u003eUKAS accredited air flow sensor, easy commissioning\u003c\/li\u003e\n\u003cli\u003eSimple LCD display and buttons for easy setup\u003c\/li\u003e\n\u003cli\u003eWattage: 1W at lowest trickle speed - 8.3W at highest extraction speed\u003c\/li\u003e\n\u003cli\u003eMinimum trickle speed 13dB(A) to maximum boost speed 37dB(A)\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size:12px;\"\u003e\u003cspan style=\"font-family:Verdana,Geneva,sans-serif;\"\u003e190mm (H) x 190mm (W)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size:12px;\"\u003e\u003cspan style=\"font-family:Verdana,Geneva,sans-serif;\"\u003eProjection 40mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size:12px;\"\u003e\u003cspan style=\"font-family:Verdana,Geneva,sans-serif;\"\u003eSpigot depth 80mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size:12px;\"\u003e\u003cspan style=\"font-family:Verdana,Geneva,sans-serif;\"\u003eExceeds extraction rates required for bathrooms, utilities and kitchens in line with Part F of the UK Building Regulations.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eManufactured in the UK\u003c\/li\u003e\n\u003cli\u003e5 Year Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tornado","offers":[{"title":"Default Title","offer_id":58037081014536,"sku":"TOR ST100DMEVHT","price":87.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/tornado-st100dmevht-silent-dmev-continuous-running-extractor-fan-humidistat-timer-6787-p.jpg?v=1784046864"},{"product_id":"tornado-st100dmevs-silent-dmev-continuous-running-extractor-fan","title":"Tornado ST100DMEVS Silent dMEV Continuous Running Extractor Fan","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Silent Tornado dMEV range adds two impressive constant flow decentralised extract ventilation fans to the already hugely popular Silent Tornado range of extractor fans.\u003c\/p\u003e\n\u003cp\u003eThe Silent dMEV range is the most powerful wall or ceiling-mounted axial extractor from Tornado to date. It features a high-pressure axial impeller, which offers near silent operation, as low as 13dB(A) and an impressive extraction rate of 126m3\/h (35l\/s). The Tornado dMEV has been specifically designed to protect your home against damp and mould issues.\u003c\/p\u003e\n\u003cp\u003eThe Tornado dMEV features Constant Volume Technology (CVT). The airflow is adjustable with 1l\/s increments to allow for easy installation and commissioning, with the integrated UKAS calibrated airflow sensor, you can be confident that it will work as intended.\u003c\/p\u003e\n\u003cp\u003eThis particular model (ST100DMEVS) is designed to be a perfect fit within kitchens, utility rooms, and bathrooms, the unit should be installed with constant and switched live connections allowing the fan to be triggered manually or can also be installed with just a constant live.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e126m3\/h 35 litres per second (Boost) \/ 18m3\/h, 5 litres per second (Trickle)\u003c\/li\u003e\n\u003cli\u003eStunning gloss white cover\u003c\/li\u003e\n\u003cli\u003eTrickle High efficiency with low SFPs\u003c\/li\u003e\n\u003cli\u003eFully adjustable normal and boost airflow settings\u003c\/li\u003e\n\u003cli\u003eConstant volume technology (CVT)\u003c\/li\u003e\n\u003cli\u003eIPX5 rated for zone 1 installations\u003c\/li\u003e\n\u003cli\u003eUKAS accredited air flow sensor, easy commissioning\u003c\/li\u003e\n\u003cli\u003eSimple LCD display and buttons for easy setup\u003c\/li\u003e\n\u003cli\u003eWattage: 1W at lowest trickle speed - 8.3W at highest extraction speed\u003c\/li\u003e\n\u003cli\u003eMinimum trickle speed 13dB(A) to maximum boost speed 37dB(A)\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cspan style=\"font-family: Verdana,Geneva,sans-serif;\"\u003e190mm (H) x 190mm (W)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cspan style=\"font-family: Verdana,Geneva,sans-serif;\"\u003eProjection 40mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cspan style=\"font-family: Verdana,Geneva,sans-serif;\"\u003eSpigot depth 80mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoPlainText\"\u003eExceeds extraction rates required for bathrooms, utilities and kitchens in line with Part F of the UK Building Regulations.\u003c\/li\u003e\n\u003cli\u003eManufactured in the UK\u003c\/li\u003e\n\u003cli\u003e5 Year Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tornado","offers":[{"title":"Default Title","offer_id":58037081178376,"sku":"TOR ST100DMEVS","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/tornado-st100dmevs-silent-dmev-continuous-running-extractor-fan-6792-p.jpg?v=1784046876"},{"product_id":"tornado-tmev125h-sentry-125mm-mev-with-humidistat","title":"Tornado TMEV125H Sentry 125mm MEV with Humidistat","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Sentry TMEV125H from Tornado is a centralised mechanical extract ventilation system (MEV), designed for continuous extraction of stale and moist air from various areas within the home or commercial environments. These multi-room extract systems are designed for installation in a variety of  settings, such as bathrooms, kitchens, utility rooms, and changing rooms.\u003c\/p\u003e\n\u003cp\u003eThe Sentry MEV unit features four fully variable speeds: low, normal, boost and purge. The unit can extract up to 118l\/s.\u003c\/p\u003e\n\u003cp\u003eThe Sentry features a simple user friendly digital display that allows the installer to accurately set airflow, insuring exactly the right ventilation rate. This level of accuracy helps minimise noise and energy consumption.\u003c\/p\u003e\n\u003cp\u003eThe range comprises of two models, Standard (TMEV125S) and Humidistat (TMEV125). The standard model is triggered by an external switch such as a bathroom light switch. The Humidistat also model incorporates a built-in humidity sensor, which triggers the unit to boost when humidity reaches a certain threshold and boosts until the humidity drops.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e425m3\/h 118 litres per second (Boost) \/ 88m3\/h, 24 litres per second (Trickle)\u003c\/li\u003e\n\u003cli\u003eIntegral humidistat\u003c\/li\u003e\n\u003cli\u003eFour variable trickle to boost airflow settings\u003c\/li\u003e\n\u003cli\u003eThree 125mm extract points as standard\u003c\/li\u003e\n\u003cli\u003eSimple LCD Display for commissioning\u003c\/li\u003e\n\u003cli\u003eUK manufactured\u003c\/li\u003e\n\u003cli\u003e5 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tornado","offers":[{"title":"Default Title","offer_id":58037269266696,"sku":"TOR TMEV125H","price":276.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/tornado-tmev125h-sentry-125mm-mev-with-humidistat-7223-p.jpg?v=1784047320"},{"product_id":"tornado-stpivlh-heated-positive-input-ventilation-piv-system","title":"Tornado STPIVLH Heated Positive Input Ventilation PIV System","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe Tornado STPIVLH Positive Input Ventilation Unit is designed to create a fresher, healthier home by delivering a continuous supply of filtered air from your loft space into the property.\u003cbr\u003eAir is gently introduced through a ceiling-mounted diffuser, typically installed in a hallway or landing, helping to improve indoor air quality while tackling persistent condensation and mould issues.\u003c\/p\u003e\u003cp\u003eTo maintain comfort throughout the year, the unit features an intelligent temperature control system. When loft temperatures fall below 10°C, an internal heating element activates to gently warm the incoming air. As temperatures rise above 10°C, the heater automatically switches off. For added flexibility, an optional Heater Enable Switch is available, allowing you to manually enable or disable the automatic heater function.\u003c\/p\u003e\u003cp\u003eThe unit also responds to seasonal temperature changes. Between 19°C and 25°C, airflow is increased by 10% to optimise ventilation performance. During very warm conditions above 25°C, the system will temporarily pause to prevent hot loft air being introduced into the home.\u003c\/p\u003e\u003cp\u003eThe STPIVLH comes complete with a 200mm ceiling diffuser and all components required for a straightforward installation in the loft above a hallway or landing area.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContinuous supply of fresh, filtered air to improve indoor air quality\u003c\/li\u003e\n\u003cli\u003eSuitable for 1  5 bedroom houses\u003c\/li\u003e\n\u003cli\u003eFour speed settings for all ventilation needs\u003c\/li\u003e\n\u003cli\u003eEffectively combats condensation and mould growth\u003c\/li\u003e\n\u003cli\u003eLoft Unit Whole House Ventilation\u003c\/li\u003e\n\u003cli\u003eEliminates Condensation \u0026amp; Prevents Mould\u003c\/li\u003e\n\u003cli\u003eSupplied with everything you need to install including ducting and stylish white square diffuser\u003c\/li\u003e\n\u003cli\u003eBuilt-in Heater - Auto-boost airflow by 10% between 19°C25°C\u003c\/li\u003e\n\u003cli\u003eSummer Bypass - Temperature protection shuts unit off above 25°C to prevent overheating indoors\u003c\/li\u003e\n\u003cli\u003eQuiet Operation\u003c\/li\u003e\n\u003cli\u003eLow Running Costs\u003c\/li\u003e\n\u003cli\u003eDimensions - 400 × 450 × 380mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tornado","offers":[{"title":"Default Title","offer_id":58037870133512,"sku":"TOR STPIVLH","price":241.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/tornado-stpivlh-heated-positive-input-ventilation-piv-system-7702-p.jpg?v=1784050358"}],"url":"https:\/\/www.extractorfanworld.co.uk\/collections\/frontpage.oembed","provider":"Extractor Fan World","version":"1.0","type":"link"}