{"title":"Blauberg Ducting \u0026 Accessories","description":"","products":[{"product_id":"blauberg-external-wind-baffle-vent-100mm-black","title":"Blauberg External Wind Baffle Vent 100mm Black","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed black external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 100mm 4\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 100mm 4\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035976470792,"sku":"BLA AH-10-100-BLACK","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-100mm-black-1-6254-p.jpg?v=1784045487"},{"product_id":"blauberg-external-wind-baffle-vent-100mm-brown","title":"Blauberg External Wind Baffle Vent 100mm Brown","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed brown external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 100mm 4\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 100mm 4\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035980173576,"sku":"BLA AH-10-100-BROWN","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-100mm-brown-1-6255-p.jpg?v=1784045494"},{"product_id":"blauberg-external-wind-baffle-vent-100mm-grey","title":"Blauberg External Wind Baffle Vent 100mm Grey","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed grey external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 100mm 4\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 100mm 4\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035982532872,"sku":"BLA AH-10-100-GREY","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-100mm-grey-1-6257-p.jpg?v=1784045505"},{"product_id":"blauberg-external-wind-baffle-vent-100mm-terracotta","title":"Blauberg External Wind Baffle Vent 100mm Terracotta","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed terracotta external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 100mm 4\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 100mm 4\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035983614216,"sku":"BLA AH-10-100-TERRACOTTA","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-100mm-terracotta-1-6258-p.jpg?v=1784045513"},{"product_id":"blauberg-external-wind-baffle-vent-100mm-white","title":"Blauberg External Wind Baffle Vent 100mm White","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed white external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 100mm 4\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 100mm 4\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035985088776,"sku":"BLA AH-10-100-WHITE","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-100mm-white-1-6259-p.jpg?v=1784045521"},{"product_id":"blauberg-external-wind-baffle-vent-125mm-black","title":"Blauberg External Wind Baffle Vent 125mm Black","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed black external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 125mm 5\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 125mm 5\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035987546376,"sku":"BLA AH-10-125-BLACK","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-125mm-black-1-6260-p.jpg?v=1784045531"},{"product_id":"blauberg-external-wind-baffle-vent-125mm-brown","title":"Blauberg External Wind Baffle Vent 125mm Brown","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed brown external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 125mm 5\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 125mm 5\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035988791560,"sku":"BLA AH-10-125-BROWN","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-125mm-brown-1-6261-p.jpg?v=1784045539"},{"product_id":"blauberg-external-wind-baffle-vent-125mm-grey","title":"Blauberg External Wind Baffle Vent 125mm Grey","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed grey external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 125mm 5\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 125mm 5\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035997573384,"sku":"BLA AH-10-125-GREY","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-125mm-grey-1-6263-p.jpg?v=1784045554"},{"product_id":"blauberg-external-wind-baffle-vent-125mm-terracotta","title":"Blauberg External Wind Baffle Vent 125mm Terracotta","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed terracotta external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 125mm 5\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 125mm 5\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58035999801608,"sku":"BLA AH-10-125-TERRACOTTA","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blauberg-external-wind-baffle-vent-125mm-terracotta-1-6264-p.jpg?v=1784045562"},{"product_id":"external-wind-baffle-vent-125mm-white","title":"External Wind Baffle Vent 125mm White","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed white external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 125mm 5\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 125mm 5\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036002750728,"sku":"BLA AH-10-125-WHITE","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/external-wind-baffle-vent-125mm-white-1-6265-p.jpg?v=1784045570"},{"product_id":"external-wind-baffle-vent-150mm-black","title":"External Wind Baffle Vent 150mm Black","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed black external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 150mm 6\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 150mm 6\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036003602696,"sku":"BLA AH-10-150-BLACK","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/external-wind-baffle-vent-150mm-black-1-6266-p.jpg?v=1784045580"},{"product_id":"external-wind-baffle-vent-150mm-brown","title":"External Wind Baffle Vent 150mm Brown","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed brown external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 150mm 6\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 150mm 6\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036006813960,"sku":"BLA AH-10-150-BROWN","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/external-wind-baffle-vent-150mm-brown-1-6267-p.jpg?v=1784045589"},{"product_id":"external-wind-baffle-vent-150mm-grey","title":"External Wind Baffle Vent 150mm Grey","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed grey external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 150mm 6\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 150mm 6\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036050690312,"sku":"BLA AH-10-150-GREY","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/external-wind-baffle-vent-150mm-grey-1-6269-p.jpg?v=1784045604"},{"product_id":"external-wind-baffle-vent-150mm-terracotta","title":"External Wind Baffle Vent 150mm Terracotta","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed terracotta external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 150mm 6\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 150mm 6\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036068614408,"sku":"BLA AH-10-150-TERRACOTTA","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/external-wind-baffle-vent-150mm-terracotta-1-6270-p.jpg?v=1784045611"},{"product_id":"external-wind-baffle-vent-150mm-white","title":"External Wind Baffle Vent 150mm White","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eA brilliantly designed white external wall vent that meets the needs of any ventilation system. They look great, reduce internal and external noise, and are easy to fit onto any external wall.\u003c\/p\u003e\u003cp\u003eThis Blauberg AH-10 vent cover will flush fit to an external wall and is intended for installation using 150mm 6\" diameter solid duct.\u003c\/p\u003e\u003cp\u003eWhen used and an air intake vent serving a heat recovery system (MVHR), positive input ventilation (PIV), mechanical extract system (MEV) or single room heat recovery unit, air is drawn in from opposite sides of the vent through louverd vents. Air also passes over a sound adsorbing lining to dampen airborne noise. This ensures weatherproofing and reduced noise without the need of a mechanical shutter or noisy back draft flap.\u003c\/p\u003e\u003cp\u003eAs an air extract vent, expelling dirty air from a heat recovery system, bathroom extractor fan or kitchen cooker hood, air passes over an airflow splitter and noise dampening liner. Extract air is then pushed horizontally out of either side of the grille and slotted louvred vents.\u003c\/p\u003e\u003cp\u003eWhen used with a Blauberg single room heat recovery unit, the airflow splitter within the vent acts to separate intake and extract airflow. Both airflow's are then forced horizontally out of either side of the vent and through louvred vent to stop any cross contamination.\u003c\/p\u003e\u003cp\u003eThe stylish outer cowl is aesthetically pleasing and will suite any modern building or blend into a traditional house. A small drip tray is also included to direct any condensated water away from a wall or window.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal baffle only. Solid ducting is required. See related products below.\u003c\/li\u003e\n\u003cli\u003eModern, wind and sound reducing wall mounted baffle vent with UV protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for any ventilation system when terminating intake or extract ducts to outside.\u003c\/li\u003e\n\u003cli\u003eFlush fitting, and will accept 150mm 6\" diameter ducts.\u003c\/li\u003e\n\u003cli\u003eUse for kitchen cooker hoods, extractor fans \u0026amp; tumble dryers.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MVHR, MEV, dMEV \u0026amp; heat recovery systems.\u003c\/li\u003e\n\u003cli\u003eRemovable hood for easy cleaning with drip tray.\u003c\/li\u003e\n\u003cli\u003eFinished in UV protected dark brown PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036088406280,"sku":"BLA AH-10-150-WHITE","price":16.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/external-wind-baffle-vent-150mm-white-1-6271-p.jpg?v=1784045619"},{"product_id":"stainless-steel-bull-nose-grille-100mm","title":"Stainless Steel Bull Nose Grille - 100mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBull nose external wall vents are an alternative choice when extracting stale moist air and condensation from kitchen cooker hoods, bathroom extractor fans and heat recovery units when terminating to an external wall.\u003c\/p\u003e\u003cp\u003eAn aesthetically pleasing circular wall grille finished in brushed stainless steel, lending itself to industrial architectural building designs.\u003c\/p\u003e\u003cp\u003eStainless steel bull nose wall vents are becoming more popular for use with continual extract MEV systems, demand control and heat recovery ventilation systems. This is mainly because they are really easy to fit, simple slide into a 100, 125, 150 or 200mm hole, wall sleeve or duct. They don't have a built in shutter so are better suited to continual ventilation as a shutter is not required.\u003c\/p\u003e\u003cp\u003eDecor S wall vents have cowled dome beak helping with rain and weather protection and the vents have a built in bird \u0026amp; vermin mesh. A rubber gasket is also supplied to stop any air leakage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4\" 100mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall bull nose vent with bird mesh.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MEV and MVHR heat recovery units \u0026amp; systems.\u003c\/li\u003e\n\u003cli\u003eSuitable for air intake \u0026amp; extract wall mounted ducts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036111573256,"sku":"BLA DECOR S 102HK","price":19.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-bull-nose-grille-100mm-1-6272-p.jpg?v=1784045626"},{"product_id":"stainless-steel-air-brick-110x54mm","title":"Stainless Steel Air Brick - 110x54mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eStainless Steel Air Brick - 110x54mm\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036115734792,"sku":"BLA DECOR S 110X54","price":15.44,"currency_code":"GBP","in_stock":true}]},{"product_id":"stainless-steel-bull-nose-grille-125mm","title":"Stainless Steel Bull Nose Grille - 125mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBull nose external wall vents are an alternative choice when extracting stale moist air and condensation from kitchen cooker hoods, bathroom extractor fans and heat recovery units when terminating to an external wall.\u003c\/p\u003e\u003cp\u003eAn aesthetically pleasing circular wall grille finished in brushed stainless steel, lending itself to industrial architectural building designs.\u003c\/p\u003e\u003cp\u003eStainless steel bull nose wall vents are becoming more popular for use with continual extract MEV systems, demand control and heat recovery ventilation systems. This is mainly because they are really easy to fit, simple slide into a 100, 125, 150 or 200mm hole, wall sleeve or duct. They don't have a built in shutter so are better suited to continual ventilation as a shutter is not required.\u003c\/p\u003e\u003cp\u003eDecor S wall vents have cowled dome beak helping with rain and weather protection and the vents have a built in bird \u0026amp; vermin mesh. A rubber gasket is also supplied to stop any air leakage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5\" 125mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall bull nose vent with bird mesh.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MEV and MVHR heat recovery units \u0026amp; systems.\u003c\/li\u003e\n\u003cli\u003eSuitable for air intake \u0026amp; extract wall mounted ducts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036116947208,"sku":"BLA DECOR S 122HK","price":27.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-bull-nose-grille-125mm-1-6274-p.jpg?v=1784045629"},{"product_id":"stainless-steel-cowled-grille-100mm","title":"Stainless Steel Cowled Grille - 100mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eStainless Steel Cowled Grille - 100mm\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4\" 100mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall vent with single blade back draught shutter.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003eIdeal for bathrooms, kitchen cooker hoods \u0026amp; extractor fans.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036119634184,"sku":"BLA DECOR S 137X137-102HK","price":30.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-cowled-grille-100mm-1-6276-p.jpg?v=1784045635"},{"product_id":"stainless-steel-bull-nose-grille-150mm","title":"Stainless Steel Bull Nose Grille - 150mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBull nose external wall vents are an alternative choice when extracting stale moist air and condensation from kitchen cooker hoods, bathroom extractor fans and heat recovery units when terminating to an external wall.\u003c\/p\u003e\u003cp\u003eAn aesthetically pleasing circular wall grille finished in brushed stainless steel, lending itself to industrial architectural building designs.\u003c\/p\u003e\u003cp\u003eStainless steel bull nose wall vents are becoming more popular for use with continual extract MEV systems, demand control and heat recovery ventilation systems. This is mainly because they are really easy to fit, simple slide into a 100, 125, 150 or 200mm hole, wall sleeve or duct. They don't have a built in shutter so are better suited to continual ventilation as a shutter is not required.\u003c\/p\u003e\u003cp\u003eDecor S wall vents have cowled dome beak helping with rain and weather protection and the vents have a built in bird \u0026amp; vermin mesh. A rubber gasket is also supplied to stop any air leakage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6\" 150mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall bull nose vent with bird mesh.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MEV and MVHR heat recovery units \u0026amp; systems.\u003c\/li\u003e\n\u003cli\u003eSuitable for air intake \u0026amp; extract wall mounted ducts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036125860104,"sku":"BLA DECOR S 152HK","price":33.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-bull-nose-grille-150mm-1-6277-p.jpg?v=1784045639"},{"product_id":"stainless-steel-cowled-grille-125mm","title":"Stainless Steel Cowled Grille - 125mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eDecor S Stainless Street Cowled External Vents are widely used as a preferred choice when extracting stale moist air and condensation from kitchen cooker hoods, bathroom extractor fans and heat recovery units when terminating to an external wall. This new metal option is an aesthetically pleasing wall grille finished in brushed stainless steel, lending itself to industrial architectural building designs.\u003c\/p\u003e\u003cp\u003eThe combination of a cowled cover and a single blade gravity shutter offers the best solution for the prevention of draughts, wind rain and bad weather entering into a room or building.\u003c\/p\u003e\u003cp\u003eWe also supply three different sizes to fit 100mm 4\", 125mm 5\" and 150mm 6\" duct or extractor fan connections. Simply use a short piece of duct or a telescopic wall sleeve to fit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5\" 125mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall vent with single blade back draught shutter.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003eIdeal for bathrooms, kitchen cooker hoods \u0026amp; extractor fans.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036132741384,"sku":"BLA DECOR S 167X167-122HK","price":36.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-cowled-grille-125mm-1-6278-p.jpg?v=1784045641"},{"product_id":"stainless-steel-gravity-shutter-125mm","title":"Stainless Steel Gravity Shutter - 125mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eStainless Steel Gravity Shutter - 125mm\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e125mm (5\") hole sizes.\u003c\/li\u003e\n\u003cli\u003eGravity operated back draught shutter.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003eIdeal for bathroom, kitchen extractor fans.\u003c\/li\u003e\n\u003cli\u003eHeavy duty blades.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036160594184,"sku":"BLA DECOR S 167X167-125G","price":35.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-gravity-shutter-125mm-1-6279-p.jpg?v=1784045644"},{"product_id":"stainless-steel-gravity-shutter-150mm","title":"Stainless Steel Gravity Shutter - 150mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eStainless Steel Gravity Shutter - 150mm\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e150mm (6\") hole sizes.\u003c\/li\u003e\n\u003cli\u003eGravity operated back draught shutter.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003eIdeal for bathroom, kitchen extractor fans.\u003c\/li\u003e\n\u003cli\u003eHeavy duty blades.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036176191752,"sku":"BLA DECOR S 167X167-150G","price":41.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-gravity-shutter-150mm-1-6280-p.jpg?v=1784045647"},{"product_id":"stainless-steel-cowled-grille-150mm","title":"Stainless Steel Cowled Grille - 150mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eDecor S Stainless Street Cowled External Vents are widely used as a preferred choice when extracting stale moist air and condensation from kitchen cooker hoods, bathroom extractor fans and heat recovery units when terminating to an external wall. This new metal option is an aesthetically pleasing wall grille finished in brushed stainless steel, lending itself to industrial architectural building designs.\u003c\/p\u003e\u003cp\u003eThe combination of a cowled cover and a single blade gravity shutter offers the best solution for the prevention of draughts, wind rain and bad weather entering into a room or building.\u003c\/p\u003e\u003cp\u003eWe also supply three different sizes to fit 100mm 4\", 125mm 5\" and 150mm 6\" duct or extractor fan connections. Simply use a short piece of duct or a telescopic wall sleeve to fit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6\" 150mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall vent with single blade back draught shutter.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003eIdeal for bathrooms, kitchen cooker hoods \u0026amp; extractor fans.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036185399560,"sku":"BLA DECOR S 167X167-152HK","price":39.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-cowled-grille-150mm-1-6281-p.jpg?v=1784045650"},{"product_id":"stainless-steel-bull-nose-grille-200mm","title":"Stainless Steel Bull Nose Grille - 200mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBull nose external wall vents are an alternative choice when extracting stale moist air and condensation from kitchen cooker hoods, bathroom extractor fans and heat recovery units when terminating to an external wall.\u003c\/p\u003e\u003cp\u003eAn aesthetically pleasing circular wall grille finished in brushed stainless steel, lending itself to industrial architectural building designs.\u003c\/p\u003e\u003cp\u003eStainless steel bull nose wall vents are becoming more popular for use with continual extract MEV systems, demand control and heat recovery ventilation systems. This is mainly because they are really easy to fit, simple slide into a 100, 125, 150 or 200mm hole, wall sleeve or duct. They don't have a built in shutter so are better suited to continual ventilation as a shutter is not required.\u003c\/p\u003e\u003cp\u003eDecor S wall vents have cowled dome beak helping with rain and weather protection and the vents have a built in bird \u0026amp; vermin mesh. A rubber gasket is also supplied to stop any air leakage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8\" 200mm diameter hole, duct or extractor fan connection.\u003c\/li\u003e\n\u003cli\u003eCowled hooded wall bull nose vent with bird mesh.\u003c\/li\u003e\n\u003cli\u003eManufactured in Stainless Steel.\u003c\/li\u003e\n\u003cli\u003ePreferred choice for MEV and MVHR heat recovery units \u0026amp; systems.\u003c\/li\u003e\n\u003cli\u003eSuitable for air intake \u0026amp; extract wall mounted ducts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036199653640,"sku":"BLA DECOR S 200HK","price":69.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/stainless-steel-bull-nose-grille-200mm-1-6282-p.jpg?v=1784045653"},{"product_id":"stainless-steel-air-brick-204x60mm","title":"Stainless Steel Air Brick - 204x60mm","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eStainless Steel Air Brick - 204x60mm\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036208828680,"sku":"BLA DECOR S 204X60","price":20.36,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-125mm-connection-6-port-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 125mm Connection  - 6 Port - Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 125mm Connection - 6 Port - Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 Port, 75mm, low profile sound \u0026amp; heat insulated metal manifold distribution box with a 125mm top or side entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of acoustically and thermally insulated, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036211384584,"sku":"BLA SR-125-75X06-01","price":127.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-125mm-connection-6-port-insulated-1-6284-p.jpg?v=1784045656"},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-125mm-connection-2-port-un-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 125mm Connection  - 2 Port - Un-Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 125mm Connection - 2 Port - Un-Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Port, 75mm, low profile un-insulated metal manifold distribution box with a 125mm top entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of slimline, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036211646728,"sku":"BLA SR-125-75X2-01","price":29.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-125mm-connection-2-port-un-insulated-1-6286-p.jpg?v=1784045658"},{"product_id":"blaufast-75mm-plastic-radial-duct-manifold-box-125mm-connection-6-port","title":"BlauFast 75mm Plastic Radial Duct Manifold Box - 125mm Connection - 6 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Plastic Radial Duct Manifold Box - 125mm Connection - 6 Port\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 Port, 75 mm, low profile manifold distribution box with a 125 mm side entry connection.\u003c\/li\u003e\n\u003cli\u003eEasy connection to semi rigid ducting with quick istallation clips.\u003c\/li\u003e\n\u003cli\u003eSupplied with blanking caps to seal of 50% of ports that are not used.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eAchieve 'Class C' airtightness when fitted with RL 75 sealing rings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036232782088,"sku":"BLA SR-125-75X6-51P-K","price":81.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-plastic-radial-duct-manifold-box-125mm-connection-6-port-6287-p.webp?v=1784045661"},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-125mm-connection-6-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box  - 125mm Connection - 6 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 125mm Connection - 6 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036251328776,"sku":"BLA SR-125-90X6 51P-K","price":80.53,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-150mm-connection-10-port-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 150mm Connection  - 10 Port - Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 150mm Connection - 10 Port - Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 Port, 75mm, low profile sound \u0026amp; heat insulated metal manifold distribution box with a 150mm top or side entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of acoustically and thermally insulated, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036252705032,"sku":"BLA SR-150-75X10-01","price":134.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-150mm-connection-10-port-insulated-1-6290-p.jpg?v=1784045664"},{"product_id":"blaufast-75mm-plastic-radial-duct-manifold-box-150mm-connection-12-port","title":"BlauFast 75mm Plastic Radial Duct Manifold Box - 150mm Connection 12 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Plastic Radial Duct Manifold Box - 150mm Connection 12 Port\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 Port, 75 mm, low profile manifold distribution box with a 150 mm top entry connection.\u003c\/li\u003e\n\u003cli\u003eEasy connection to semi rigid ducting with quick istallation clips.\u003c\/li\u003e\n\u003cli\u003eSupplied with blanking caps to seal of 50% of ports that are not used.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eAchieve 'Class C' airtightness when fitted with RL 75 sealing rings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036264599816,"sku":"BLA SR-150-75X12-51P-K","price":115.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-plastic-radial-duct-manifold-box-150mm-connection-12-port-1-6291-p.png?v=1784045668"},{"product_id":"blaufast-75mm-plastic-radial-duct-manifold-box-150mm-connection-8-port","title":"BlauFast 75mm Plastic Radial Duct Manifold Box - 150mm Connection - 8 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Plastic Radial Duct Manifold Box - 150mm Connection - 8 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036265156872,"sku":"BLA SR-150-75X8 51P-K","price":105.46,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-150mm-connection-8-port-un-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 150mm Connection - 8 Port - Un-Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 150mm Connection - 8 Port - Un-Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 Port, 75mm, low profile un-insulated metal manifold distribution box with a 150mm top entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of slimline, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036265189640,"sku":"BLA SR-150-75X8-01","price":38.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-150mm-connection-8-port-un-insulated-1-6293-p.png?v=1784045670"},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-150mm-connection-12-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box - 150mm Connection - 12 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 150mm Connection - 12 Port\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e90 mm, low profile manifold distribution box with top or side entry connection.\u003c\/li\u003e\n\u003cli\u003eEasy connection to semi rigid ducting with quick installation clips.\u003c\/li\u003e\n\u003cli\u003eSupplied with blanking caps to seal of 50% of ports that are not used.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036285440264,"sku":"BLA SR-150-90X12-50P-K","price":123.4,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-150mm-connection-8-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box - 150mm Connection - 8 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 150mm Connection - 8 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036285505800,"sku":"BLA SR-150-90X8-50P-K","price":88.18,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-160mm-connection-10-port-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 160mm Connection - 10 Port - Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 160mm Connection - 10 Port - Insulated\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036285538568,"sku":"BLA SR-160-75X10-01","price":126.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-160mm-connection-10-port-insulated-1-6297-p.jpg?v=1784045672"},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-160mm-connection-12-port-un-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 160mm Connection  - 12 Port - Un-Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 160mm Connection - 12 Port - Un-Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 Port, 75mm, low profile un-insulated metal manifold distribution box with a 160mm off centre top entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of slimline, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036286882056,"sku":"BLA SR-160-75X12-01","price":126.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-160mm-connection-12-port-un-insulated-1-6298-p.jpg?v=1784045675"},{"product_id":"blaufast-75mm-plastic-radial-duct-manifold-box-160mm-connection-12-port","title":"Blaufast 75mm Plastic Radial Duct Manifold Box - 160mm Connection - 12 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlaufast 75mm Plastic Radial Duct Manifold Box - 160mm Connection - 12 Port\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 Port, 75 mm, low profile manifold distribution box with a 160 mm top entry connection.\u003c\/li\u003e\n\u003cli\u003eEasy connection to semi rigid ducting with quick istallation clips.\u003c\/li\u003e\n\u003cli\u003eSupplied with blanking caps to seal of 50% of ports that are not used.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eAchieve 'Class C' airtightness when fitted with RL 75 sealing rings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036290584840,"sku":"BLA SR-160-75X12-50P-K","price":115.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-plastic-radial-duct-manifold-box-160mm-connection-12-port-6299-p.webp?v=1784045676"},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-160mm-connection-8-port-un-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 160mm Connection  - 8 Port - Un-Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 160mm Connection - 8 Port - Un-Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 Port, 75mm, low profile un-insulated metal manifold distribution box with a 160mm top entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of slimline, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036322042120,"sku":"BLA SR-160-75X8-01","price":126.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-160mm-connection-8-port-un-insulated-1-6301-p.png?v=1784045680"},{"product_id":"blaufast-75mm-plastic-radial-duct-manifold-box-160mm-connection-8-port","title":"BlauFast 75mm Plastic Radial Duct Manifold Box - 160mm Connection - 8 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Plastic Radial Duct Manifold Box - 160mm Connection - 8 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036322173192,"sku":"BLA SR-160-75X8-50P-K","price":78.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-plastic-radial-duct-manifold-box-160mm-connection-8-port-1-6303-p.png?v=1784045683"},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-160mm-connection-12-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box - 160mm Connection - 12 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 160mm Connection - 12 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036322697480,"sku":"BLA SR-160-90X12-50P-K","price":123.4,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-160mm-connection-8-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box - 160mm Connection - 8 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 160mm Connection - 8 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036322763016,"sku":"BLA SR-160-90X8-50P-K","price":88.18,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-200mm-connection-10-port-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 200mm Connection  - 10 Port - Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 200mm Connection - 10 Port - Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 Port, 75mm, low profile sound \u0026amp; heat insulated metal manifold distribution box with a 200mm top or side entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of acoustically and thermally insulated, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036338131208,"sku":"BLA SR-200-75X10-01","price":160.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-200mm-connection-10-port-insulated-1-6306-p.jpg?v=1784045685"},{"product_id":"blaufast-75mm-plastic-radial-duct-manifold-box-200mm-connection-12-port","title":"BlauFast 75mm Plastic Radial Duct Manifold Box - 200mm Connection - 12 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Plastic Radial Duct Manifold Box - 200mm Connection - 12 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036361494792,"sku":"BLA SR-200-75X12-50P-K","price":122.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-plastic-radial-duct-manifold-box-200mm-connection-12-port-1-6307-p.png?v=1784045689"},{"product_id":"blaufast-75mm-metal-radial-duct-manifold-box-200mm-connection-15-port-insulated","title":"BlauFast 75mm Metal Radial Duct Manifold Box - 200mm Connection - 15 Port - Insulated","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 75mm Metal Radial Duct Manifold Box - 200mm Connection - 15 Port - Insulated\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e15 Port, 75mm, low profile sound \u0026amp; heat insulated metal manifold distribution box with a 200mm top or side entry connection.\u003c\/li\u003e\n\u003cli\u003eA large range of acoustically and thermally insulated, multiple port manifolds designed for new build and retrofitting.\u003c\/li\u003e\n\u003cli\u003eUse for air fresh air supply and stale humid 'heat recovered' extract air.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations.\u003c\/li\u003e\n\u003cli\u003eSuitable for Passivhaus, air tight or any mechanical heat recovery ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036368343304,"sku":"BLA SR-200-75X15-01","price":170.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-75mm-metal-radial-duct-manifold-box-200mm-connection-15-port-insulated-1-6308-p.jpg?v=1784045694"},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-200mm-connection-12-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box - 200mm Connection - 12 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 200mm Connection - 12 Port\u003c\/p\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036383580424,"sku":"BLA SR-200-90X12-50P-K","price":123.4,"currency_code":"GBP","in_stock":true}]},{"product_id":"blaufast-90mm-plastic-radial-duct-manifold-box-200mm-connection-8-port","title":"BlauFast 90mm Plastic Radial Duct Manifold Box - 200mm Connection - 8 Port","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast 90mm Plastic Radial Duct Manifold Box - 200mm Connection - 8 Port\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e90 mm, low profile manifold distribution box with top or side entry connection.\u003c\/li\u003e\n\u003cli\u003eEasy connection to semi rigid ducting with quick installation clips.\u003c\/li\u003e\n\u003cli\u003eSupplied with blanking caps to seal of 50% of ports that are not used.\u003c\/li\u003e\n\u003cli\u003eEasy to fit and suitable for loft, ceiling, void, underfloor and visible installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036387381512,"sku":"BLA SR-200-90X8-50P-K","price":88.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-90mm-plastic-radial-duct-manifold-box-200mm-connection-8-port-6310-p.jpg?v=1784045695"},{"product_id":"blaufast-radial-duct-floor-grille-pattern-3","title":"BlauFast Radial Duct Floor Grille Pattern 3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast Radial Duct Floor Grille Pattern 3\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse for connecting semi rigid duct to ceiling mounted grilles.\u003c\/li\u003e\n\u003cli\u003eEasy to fit, quick connect, no tools required.\u003c\/li\u003e\n\u003cli\u003ePreferred duct solution for residential MVHR units.\u003c\/li\u003e\n\u003cli\u003eFull range of ancillaries, plenums \u0026amp; manifold boxes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036399702280,"sku":"BLA BLAUFAST GF 300X100 03","price":45.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-radial-duct-floor-grille-pattern-3-6316-p.jpg?v=1784045698"},{"product_id":"blaufast-radial-duct-overlay-floor-grille-pattern-7","title":"BlauFast Radial Duct Overlay Floor Grille Pattern 7","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eBlauFast Radial Duct Overlay Floor Grille Pattern 7\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse for connecting semi rigid duct to ceiling mounted grilles.\u003c\/li\u003e\n\u003cli\u003eEasy to fit, quick connect, no tools required.\u003c\/li\u003e\n\u003cli\u003ePreferred duct solution for residential MVHR units.\u003c\/li\u003e\n\u003cli\u003eFull range of ancillaries, plenums \u0026amp; manifold boxes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blauberg","offers":[{"title":"Default Title","offer_id":58036415594760,"sku":"BLA BLAUFAST GF 300X100 07","price":23.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/files\/blaufast-radial-duct-overlay-floor-grille-pattern-7-6318-p.jpg?v=1784045703"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/2362\/0872\/collections\/blauberg-ducting-accessories-283-c.jpg?v=1781629737","url":"https:\/\/www.extractorfanworld.co.uk\/collections\/blauberg-ducting-accessories-283.oembed?page=4","provider":"Extractor Fan World","version":"1.0","type":"link"}